QTH.COM Ham Radio Classified Ads: TOWER - Swap amateur radio HF VHF equipment buy sell trade on line

Glen Martin 9' Roof Tower: Model 936. All aluminum. With Yaesu GS-065 Thrust Bearing. Glen Martin's strongest roof tower rated for 16 Sq Ft of antenna load. Local Pickup SE Wisconsin. Tower was not modified in any way and has no drill holes in the legs , which would weaken the structure. $475; Listing #1685275 - Submitted on 05/01/24 by Callsign W9GU - IP: syn-072-133-185-000.res.spectrum.com; Click to Contact -- Send this Ad to a Friend
US Tower MA-40+MARB+MAF (PHX AZ): Good condition US Tower MA40 with MARB (rotating base fixture) and MAF (tilt fixture).
Also included are 2 coax arms and original engineering docs.
*
Easy load thru an RV gate.
*
$1000 pickup Phoenix AZ metro.
(Additional pix at the website below); Listing #1684782 - Submitted on 04/28/24 by Callsign WB7X, Modified on 05/01/24, Web Site: http://www.WB7X.net - IP: ip174-74-184-30.ph.ph.cox.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
32ft Crank Up/Tilt Ovr with Mast/Bearing: 32 Ft crank up / tilt over tower with 10ft galvanized chrome moly mast, thrust bearing and tilt over tower base. Already taken down and ready to go. No structural rust, all you need is new bolts. $3000.
Located 45 min NE Atlanta Ga, Flowery Branch Ga.; Listing #1685095 - Submitted on 04/30/24 by Callsign W2WTF - IP: 167.192.187.49; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
rohn 25g tower guy wire bracket & acces.: used rohn25g guy wire tower bracket and hardware asking 197.00 plus 40 shipping; Listing #1684954 - Submitted on 04/29/24 by Callsign NONE, Modified on 04/29/24 - IP: syn-098-121-120-069.res.spectrum.com; Click to Contact -- Send this Ad to a Friend
Glen Martin Tilt / Self Supporting Tower: Glen Martin 40ft Aluminum tilt Self-supporting tower in Excellent shape. Has internal winch that connects to the cantilever assembly to raise and lower the top 30 feet of the tower to allow easy access to your antenna. Price $200.00
Now so you fully understand. The base section and the leaver pole is very heavy and is why the tower is self supporting.
There is no rotor or thrust bearing plates will need to be fabricated using aluminum stock and V bolts.
One section needs to have cross supports changed out will provide the material and they bolt on.
Now you understand the price it will takes a little work to have an exceptional aluminum tower.; Listing #1683296 - Submitted on 04/16/24 by Callsign AG4RO, Modified on 04/29/24 - IP: 68-122-14-203.lightspeed.mmphtn.sbcglobal.net; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
Rohn 25G HD NEW Side Arm Mount: New heavy duty Rohn 25G side arm mount. Extends a antenna over 30" away from face of tower. Mount is 36" High, 2.25" outer pipe OD to attach saddle clamps for a antenna. Just mount, no u-bolts. It's 70 pounds, so pickup is in 21702. $300. Thanks, Dave N3EJT; Listing #1683727 - Submitted on 04/20/24 by Callsign N3EJT, Modified on 04/27/24 - IP: 88.sub-174-216-151.myvzw.com; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
WTB: Wanting to Buy a US Tower MD-75, must supply real photos not ads from HRO.Will pay Cash.; Listing #1682561 - Submitted on 04/11/24 by Callsign W5JUD, Modified on 04/27/24 - IP: 99-35-58-162.lightspeed.hstntx.sbcglobal.net; Click to Contact -- Send this Ad to a Friend
For Sale: Rohn 45G Guy Bracket: This is a heavy duty guy bracket for Rohn 45G. Original Rohn product removed from a commercial tower. You will need to purchase some galvanized hardware. Rohn 45G guy brackets sell for $250 and up. I will ship this to you for $150. Stan, K5GO; Listing #1684013 - Submitted on 04/22/24 by Callsign K5GO, Modified on 04/26/24 - IP: 172.59.225.59; Click to Contact -- Send this Ad to a Friend
14 INCH x 1/4 Teflon/PTFE TIES: I have EV proof ties for use on towers and antennas. 30 for $45 shipped. Hard to find & expensive.
The material is EV bullet proof. HD 14 Inch by 1/4 inch BLUE in color.
Have used same brand on my towers for 30 years with no deuteriation in Sunny North Ca..; Listing #1684465 - Submitted on 04/25/24 by Callsign W6OD - IP: 107-214-149-221.lightspeed.sntcca.sbcglobal.net; Click to Contact -- Send this Ad to a Friend
Rohn 45g tower top sections: I have several top sections for sale these are new old stock Rohn 45g with top plate and a short mast pipe please see photo price is 225.00 each section please call or text 205-428-7001 if interested thks ken Kt4ki Bham; Listing #1675965 - Submitted on 02/20/24 by Callsign KT4KI, Modified on 04/23/24 - IP: 184.81.151.146; Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend